VCP 7-40 #8 w/motor AIR 180 S4 22 kW 1500 rpm, execution 5

Centrifugal (radial) dust fan of the VCP 7-40 #8 series (VTsP 130‑38) with Electric motor AIR 180 S4 22.0 kW 1500 RPM, built to design No. 5 with belt drive, made of carbon steel.

This fan is designed to convey explosion‑proof, non‑abrasive dust‑gas‑air mixtures at air temperatures up to 80 °C, with aggressiveness toward standard carbon steel no greater than that of clean air, and free of sticky or fibrous materials. Solid particle content up to 1000000 mg/m³ (1 kg/m³).

The dust fan VCP 7-40 #8 (VTsP 130‑38) is intended for removing chips and metal dust from machine tools, for sanitary‑technical and industrial stationary applications.

General information about VCP 7-40 #8 w/motor AIR 180 S4 22 kW 1500 rpm dust fans (VTsP 130‑38):

• single‑suction inlet
• spiral, adjustable housing
• forward‑curved blades
• blade count: 6
• rotation: clockwise or counterclockwise
• design No. 5 (belt‑drive version) with belt drive (V‑belts, drive and driven pulleys)
• construction material: carbon steel

Application areas of VCP 7-40 #8 w/motor AIR 180 S4 22 kW 1500 rpm dust fans (VTsP 130‑38):

• dust‑collection systems
• pneumatic conveying systems
• woodworking machinery (wood dust and shavings removal)
• metalworking machinery (metal dust and chips removal)
• other sanitary‑technical and industrial stationary uses

Construction options for VCP 7-40 #8 fans:

• carbon steel
• stainless steel
• dissimilar metal alloys

Design and operation of VCP 7-40 #8 fan (VTsP 130‑38):

The spiral housing is a single‑piece construction.

A cylindrical inlet flange is attached to the front wall; the outlet flange is welded to the housing. The gap between flange and impeller is adjustable.

The welded impeller has 6 radial, backward‑curved blades, a hub, and two spider arms.

Electric motor AIR 180 S4 22.0 Power kW 1500 Vol./Min

The Electric motor AIR 180 S4 motor is an industrial three‑phase squirrel‑cage induction motor rated for 50 Hz at 220/380 V. Nominal speed: 1500 RPM. Frame height: 180 mm; shaft diameter: 55 mm; power: 22.0 kW; climatic version: UZ; IP rating: 54. Frames from 1.5 kW and up are cast in gray iron; on request, aluminum‑alloy housings are available.

Drive by belt transmission; pulleys and belts are enclosed.

Fan and motor are mounted on a common welded frame of channels and angles with foundation bolt holes.

Impeller and pulleys are keyed; axial displacement prevented by end‑thrust washers and bolts.

The dust‑gas‑air mixture enters through the inlet flange, is captured by the impeller, and is discharged through the spiral housing to the outlet flange.

Housing (scroll) VCP 7-40 #8

Orientation of scroll for right‑hand (PR) and left‑hand (LIV) rotation (viewed from inlet).