VCP 6-46 #10 w/motor AIR 250 S6 45 kW 1000 rpm, execution 1

Centrifugal dust fan of series VCP 6-46 #10 (VCP 115-52), manufactured according to execution scheme No 1, impeller mounted directly on the electric motor shaft, made of carbon steel and Electric motor AIR 250 S6 45.0 kW 1000 rpm.

This fan is designed for conveying explosion-proof, non-abrasive dust-gas-air mixtures with a temperature not exceeding 80 °C, whose aggressiveness towards ordinary-grade carbon steel does not exceed that of air. The mixtures must not contain sticky substances or fibrous materials. The content of solid particles in the conveyed medium is up to 100000 mg/m³ (1 kg/m³). The fan VCP 6-46 #10 (VCP 115-52) is used for removing chips and metallic dust from machines for sanitary-technical and production purposes in stationary conditions.

General information about VCP 6-46 #10 w/motor AIR 250 S6 45 kW 1000 rpm (VCP 115-52) dust fans:

• single-sided suction;
• rotatable spiral housing;
• radial straight blades;
• number of blades – 8 pcs;
• rotation direction – right and left;
• material: carbon steel;
• scheme No. 1 – impeller on motor shaft;

Application areas of VCP 6-46 #10 w/motor AIR 250 S6 45 kW 1000 rpm (VCP 115-52) dust fans:

• in dust extraction systems;
• in pneumatic transport systems;
• for extracting wood dust and chips from woodworking machines;
• for extracting metal dust and chips from metalworking machines;
• for other sanitary and industrial purposes.

Available configurations of VCP 6-46 #10 (VCP 115-52) centrifugal fans:

• carbon steel version;
• stainless steel version;
• version from dissimilar metals.

Design and main assemblies of the VCP 6-46 #10 (VCP 115-52) dust fan:

• impeller;
• spiral housing;
• Electric motor AIR 250 S6 45.0 Power kW 1000 Vol./Min;
• inlet pipe;
• bearing assembly (running gear);
• base plate;
• frame;
• belt drive: V-belts, drive and driven pulleys;

Impeller of the fan VCP 6-46 #10 (VCP 115-52)

The welded impeller consists of 8 radially mounted straight blades, a hub, and two discs.

Spiral housing of the high-pressure fan VCP 6-46 #10 (VCP 115-52)

The spiral housing is a one-piece welded structure. A cylindrical inlet nozzle with a flange is attached to the front wall. The outlet nozzle is welded to the housing. The gap between the inlet and the impeller is adjustable.

Electric motor AIR 250 S6 motor is a general-purpose asynchronous three-phase motor with a squirrel-cage rotor, designed to operate from an AC power supply with a frequency of 50 Hz and voltage of 220/380 V. The nominal speed of Electric motor AIR 250 S6 is 1000 rpm. Shaft height: 250 mm; shaft diameter: 75 mm; power: 45.0 kW; climate version: У3; IP rating: 54.

Fan casing orientation (right-hand and left-hand), view from the inlet side: