VC 14-46 VZ (VZI) aluminum #3.15 w/motor 4VR 80 A4 1.1 kW 1500 rpm, execution 1

The medium-pressure centrifugal fan of the VC 14-46 VZ (VZI) #3,15 series (VR-287-46.1) with the Electric motor 4VR 80 A4 1.1 Power kW 1500 Vol./Min electric motor, made from aluminum alloys, is designed for explosive atmospheres.

The VC 14-46 VZ (VZI) #3,15 fan is intended for ventilation or air conditioning systems of explosive gas-air mixtures of categories 1 and 2, groups T1, T2, T3 according to the classification of the "Electrical Installations Code" (EIC), which do not cause accelerated corrosion of the materials in the airflow parts of the fan (air aggressiveness up to 80 °C), and do not contain fibrous materials, sticky substances, dust, or other solid impurities in concentrations greater than 100 mg/m³, under moderate (U) climate (placement category 3) and tropical (T) climate (placement category 2) according to GOST 15150.

Fans of the VC 14-46 VZ (VR-287-46.1) series must not be used for transporting gas-air mixtures:

• Containing explosives, extra oxygen, or explosive dusts;
• From process installations where explosive substances are heated above their ignition temperature or are under excess pressure.

Fans with enhanced spark protection are used for servicing explosive areas of classes B-1a and B-1b according to the "Electrical Installations Code" (EIC), provided normal working conditions are maintained.

This model is an analogue of medium-pressure centrifugal fans: VR-287-46.1, VR 320-46, VR-300-46, VR 300-45, VR 289-46, VR 15-45.

• Fan VC 14-46 VZ (VZI) #3,15 (VR-287-46.1) without electric motor
• Impeller of the fan VC 14-46 VZ (VZI) #3,15 (VR-287-46.1)
• Fan casing (housing) VC 14-46 VZ (VZI) #3,15 (VR-287-46.1)
• Electric motor Electric motor 4VR 80 A4 1.1 Power kW 1500 Vol./Min for the fan VC 14-46 VZ (VZI) #3,15

• Medium pressure
• Single-side suction
• Spiral rotary housing
• Forward-curved blades
• Number of blades: 32 pcs.
• Rotation direction: right and left
• Manufactured in accordance with TU 22-54.36-83
• Material: aluminum alloys

The centrifugal fan VC 14-46 VZ (VZI) aluminum #3.15 w/motor 4VR 80 A4 1.1 kW 1500 rpm is designed for ventilation or air conditioning systems of explosive gas-air mixtures of categories 1 and 2, groups T1, T2, T3 according to the "Electrical Installations Code" (EIC), which do not cause accelerated corrosion of the fan flow part materials.

• Air conditioning systems
• Ventilation systems
• Air heating systems
• Other sanitary and industrial applications

The centrifugal fan VC 14-46 VZ (VZI) aluminum #3.15 w/motor 4VR 80 A4 1.1 kW 1500 rpm (VR-287-46.1) with the Electric motor 4VR 80 A4 1.1 Power kW 1500 Vol./Min electric motor is operated under moderate climate conditions, at ambient temperatures from -40 °C to +40 °C. The temperature of the conveyed medium must not exceed 80 °C.

Air, receiving energy from the impeller blades, enters the fan under the influence of centrifugal force at an angle of 90 degrees and moves radially into the spiral casing; in the casing, moving along the spiral-shaped housing, it is directed under pressure through the fan exhaust.

• Spiral casing
• Impeller
• Base frame
• Collector
• Electric motor Electric motor 4VR 80 A4 1.1 Power kW 1500 Vol./Min

The impeller consists of a front and rear disk, 32 sheet blades, and a hub.

The base frame is welded. The base has a hole for mounting on vibration isolators or on a foundation. The electric motor and the cover are mounted on the base.

The conical collector for supplying air to the impeller is attached to the inlet pipe. The gap between the collector and the front disk of the impeller is regulated by axial movement of the collector in the inlet pipe.

• a) right rotation
• b) left rotation

• Category 1: For outdoor use (exposure to the full range of climatic factors typical of the region);
• Category 2: For use under a shelter or in premises where temperature and humidity fluctuations are not significantly different from outdoor conditions and where there is relatively free access to outside air, such as in tents, van bodies, trailers, uninsulated metal premises, as well as in the enclosure of a complete product of category 1 (absence of direct sunlight and precipitation);
• Category 3: For use in enclosed spaces with natural ventilation without artificially regulated climate conditions, where temperature and humidity fluctuations, and the effect of sand and dust, are significantly less than outdoors, for example, in insulated metal, stone, concrete, or wooden premises (absence of precipitation, direct sunlight; significant reduction in wind; significant reduction or absence of the effect of scattered sunlight and moisture condensation);
• Category 4: For use in premises with artificially regulated climate conditions, e.g., in closed, heated or cooled and ventilated production spaces, in premises with conditioned or partially conditioned air, and other, including well-ventilated underground premises (absence of direct sunlight, precipitation, wind, sand, and outside air dust; absence or significant reduction of the effect of scattered sunlight and moisture condensation);
• Category 5: For use in premises with high humidity (for example, in unheated and unventilated underground spaces, including mines, basements, in soil, in ship compartments and other rooms where water may be present for long periods or frequent condensation of moisture on the walls and ceiling, particularly in some holds, in certain workshops of textile, hydrometallurgical production, etc.).