UCM-38-600

General information about cyclone UCM-38-600
The ventilation cyclone UCM-38-600 is used in pneumatic transport systems and aspiration units. Its main purpose is to capture fine dust in industrial facilities. Most often, the dust collector UCM-38-600 is applied in shelling and grinding departments of flour and cereal mills, where effective air purification is required.

Depending on operating conditions, the industrial cyclone can be equipped with either a snail on the exhaust pipe or a protective cap. If the unit operates under pressure, a cap is installed to prevent precipitation from entering the system. When operating under vacuum, a snail-expander is used, which improves dust collection efficiency.

Design of cyclone UCM-38-600
The efficiency of the cyclone UCM-38-600 in capturing flour dust is as follows:

• for group cyclones — 99–99.5 %;
• for single-unit cyclones — 98–99 %.

These figures are considered among the highest for dust collectors of this class, while the device operates without additional filters. For ease of installation and operation, the cyclone is produced in both right-hand and left-hand versions.

The upgraded cyclone for flour production UCM-38-600 differs from the previous UC-38 model by having a spiral-screw vortex generator. This design solution has increased the unit’s productivity and significantly reduced aerodynamic resistance.

Cyclone UCM-38-600 hopper
The industrial cyclone UCM-38-600 is equipped with a collection hopper for gathering and temporarily storing dust. For reliable and stable performance, it is important to ensure that the dust level does not reach the control plane located at a distance of 0.5 of the hopper diameter from its cover.

Since the dust collector is not fully automated, regular supervision by personnel is required. Failure to clean the hopper in time may reduce system efficiency, shorten service life, and cause equipment failure. By following simple operating rules, the air-cleaning cyclone UCM-38-600 provides reliable and long-lasting operation for the enterprise.

Main characteristics of cyclone UCM-38-600

• Purpose — capturing fine dust particles;
• Application — pneumatic transport and aspiration systems (flour and cereal mills);
• Diameter: 250–850 mm;
• Cleaning efficiency:
  • group cyclones — 99–99.5 %;
  • single-unit — 98–99 %;
• Execution: right-hand and left-hand;
• Design feature — spiral-screw vortex generator, which increases productivity and reduces aerodynamic resistance.