We work! Large selection of equipment for ventilation systems.

Catalog

6, Predprinimatelska str., Brovary, Kyiv region

shop
from 7:00 to 20:00 Mon - Fri
warehouse and accounting
Mon - Fri from 8:00 to 17:00
without a lunch break

vent@ventilator.ua

Go to contacts

0 0

Catalog

Main page

Wishlist

Compare

Contacts

Dust-separators VZP-M

All about product

Modifications

Designation of cyclone models VZP-M-XXX

V — counter;
Z — swirling;
P — flow;
M — modernized type (differs from VZP by higher efficiency);
XXX — diameter of the cylindrical part of the cyclone in millimeters, for example 1200.

Modifications

Dust-separators VZP-M

Name	SKU	Productivity, м³/h	Stock status	Price:
VZP-M-300	ID35759	VZP-M-300	In stock	606€
VZP-M-400	ID35760	2000	In stock	633€
VZP-M-450	ID35761	2500	In stock	654€
VZP-M-500	ID35762	3000	In stock	940€
VZP-M-600	ID35763	4000	In stock	1 164€
VZP-M-800	ID35764	7000	In stock	2 165€
VZP-M-1000	ID35765	10000	In stock	3 371€
VZP-M-1200	ID35766	14000	In stock	5 107€
VZP-M-1300	ID35767	17000	In stock	5 516€

VZP-M class dust collector

VZP-M class dust collector is a dust collector with counter-rotating swirling flows for cleaning the air from fine and medium-dispersed dust. VZP-M class dust collector is a modernized version of its predecessor. This class of dust collectors has a higher efficiency of separating fine dust.

VZP-M class dust collector is designed to capture dust with a fibrous structure that is medium/strongly cohesive in aspiration installations and pneumatic transport systems. It is effectively used in pneumatic transport and aspiration systems for cleaning gas-air environments from medium and fine dust, as well as for trapping dust particles in industry, the food industry and mining enterprises.

Marking of a VZP-M class dust collector

Example of the designation - «VZP-M-600», where:

«VZP» - the presence of counter-swirling flows;
«M» - modernized design;
«600» - internal cylinder diameter, mm.

This marking allows you to determine the air performance, the degree of dust purification and the possibility of using the unit in pneumatic transport systems and aspiration installations.

Design advantages

The design of the VZP-M class dust collector is supplemented with an upper spiral-type swirler. It is due to its presence, together with the conical shape of the body, that a higher degree of purification from fine dust is achieved in the VZP-M cyclone. VZP-M class dust collectors are made of thick metal sheets, carbon or stainless steel, which allows them to be successfully used in aspiration and pneumatic transport systems. To connect various elements to the holes, flanges are welded, and galvanized steel is used for adapters of different sizes.

For the simultaneous flow of air through two channels of the unit, only one VZP fan is required. Dust collectors of this class can be made in right- or left-hand version. The productivity of VZP-M models varies from 1000 to 17000 m³/h, the diameter of the cylindrical part is 300 ÷ 1300 mm, the optimal air speed is 3.5 m/s. The efficiency of air purification from fine dust reaches 98% - 99%. The VZP-M dust collector is coated with paint and packaged before delivery.

Operating principle

The VZP-M class dust collector purifies gas-air environments using the method of centrifugal separation of solid suspended inclusions. The air flow is based on two flows: the main flow is twisted from top to bottom along a given trajectory from above and directed to the walls of the cyclone, and an additional secondary flow rises from below, passes along the axis and is discharged through the central pipe.

Centrifugal force directs solid particles from the center to the walls, after which they are collected in the dust collector hopper. This design allows you to adjust the flow ratio, which increases the degree of fine dust capture even if the initial air parameters change. The air from the device is discharged through the central pipe, which ensures stable operation of the aspiration and pneumatic transport system.

Advantages

versatility and compactness;
high degree of filtration of fine dust;
possibility of use in various areas of industry;
relatively low cost;
affordable adjustment of the flow ratio;
analogs. air performance characteristics are not inferior;
you can use it as a filter for two air flows.

Field of application

VZP dust collectors have proven themselves well at enterprises of the mining industry, woodworking, food, chemical, light, textile industries and other industries. They effectively clean gas-air environments from medium and fine dust, shavings, fibrous materials and food industry dust.

Additional features of the VZP-M dust collector

VZP-M dust collectors perform dust filtration by using two air flows. The main flow is swirled from above, and the additional flow rises from below and passes along the axis of the cyclone. Thanks to this design, maximum capture of fine dust is achieved. The process can be adjusted by the flow ratio, which achieves optimal cleaning efficiency even with variable air parameters. Even if the initial air parameters change, the dust collector ensures stable operation of aspiration and pneumatic transport systems.

Using adapters and fans

Adapters and flanges are used to connect various elements of the dust collector, which allows the device to be adapted to any channels and systems. For simultaneous air supply through two The unit only needs one VCP fan, which greatly simplifies maintenance and reduces energy consumption. This design improves air circulation and ensures uniform dust cleaning in all parts of the device.

VZP-M dust collectors as cleaning equipment

This dust collector is used as an effective equipment for cleaning gas-air environments in various industrial areas. It can be used as a filter for fine dust, food industry dust, shavings and fibrous materials. Dust collectors have proven themselves well in pneumatic transport and aspiration systems, as well as in special orders made of thick metal for high loads.

Advantages of using swirling flows

Swirl the main flow and raise the secondary flow from below allows you to increase the degree of air purification. Dust particles are directed from the center to the walls of the cyclone by centrifugal force and collected in the dust collector hopper. This technology guarantees high efficiency of the equipment and provides stable filtration even in conditions of high concentrations of dust or fine particles.

Features of operation and installation

VZP-M dust collectors are manufactured for work in climatic zones and in the design of UHL, in accordance with State Standard 15150-69. They are used in aspiration and pneumatic transport systems with fans of the VZP class of models 5-45, 6-45, 6-46, 7-40. To ensure optimal performance, the units can be combined into group installations of two or four dust collectors, with a common supply of flows to the swirler and hopper. VZP-M is coated with paint and packaged before delivery, which guarantees long-term operation and reliability in various industrial conditions.

Expand