Designation of Cyclone Models SIOT-X
| Name | SKU | Pressure, Pa | Productivity, м³/h | Stock status | Price: | |
|---|---|---|---|---|---|---|
| SIOT-1 | ID23396 | 500 | 1500 | In stock |
8 460₴
|
|
| SIOT-2 | ID23527 | 500 | 3000 | In stock |
16 920₴
|
|
| SIOT-3 | ID23529 | 500 | SIOT-3 | In stock |
24 550₴
|
|
| SIOT-4 | ID23530 | 500 | 6000 | In stock |
32 347₴
|
|
| SIOT-5 | ID23531 | 500 | 7500 | In stock |
40 475₴
|
|
| SIOT-6 | ID23533 | 500 | 8500 | In stock |
45 617₴
|
|
| SIOT-7 | ID23535 | 500 | 10000 | In stock |
53 579₴
|
Cyclone is a trap for foreign inclusions used for cleaning both the gas phase and contaminated liquid.
CIOT cyclones are in demand for cleaning various types of gas-air mixtures formed in such technological processes as roasting, removal of excess moisture, sintering, combustion of fuel raw materials and many others. CIOT class cyclones effectively clean dry air from dust pollution. This can be dry asbestos, plastic, textolite, rubber, gypsum, lime, cement and other similar dust with a concentration of up to 300 g/m3. The CIOT series of units finds its application in many areas of industrial production. This includes ferrous/non-ferrous metallurgy, energy, construction materials production, mechanical engineering, food industry, etc. Therefore, CIOT class cyclones are universal devices.
It is strictly forbidden to use CIOT class dust collectors in working environments of a toxic and explosive nature, with the presence of sticky elements and fibrous fractions in suspended form. The temperature of the treated environment should not exceed the standard established for this process - 400 degrees. To obtain efficiency close to the maximum threshold, the specific properties of the contaminants and the design features of the equipment play a large role. The smaller the diameter of the CIOT cyclone, the better and more effective the process of capturing foreign fine-grained suspensions will be.
Brand designation:
CIOT cyclone - 2, where:
In comparison with other classes, the inlet pipe of the CIOT cyclone type equipment has a triangular shape, there is no cylindrical compartment in the housing, and the housing itself is made in the form of a cone, which does not reduce the efficiency of this class at all compared to the universal class TsN-15. Due to the conical shape, an intensive helical flow of air is created along the entire height of the cyclone, which contributes to better gas purification from dust particles. The level of trapping of foreign inclusions by CIOT cyclones is quite high - 80%.
When choosing a cyclone, it is necessary to take into account the properties of contaminants, their dispersion, and the design power of the device. There is a model of the CIOT device with the lowest productivity in this class - 1500 m3/h, a modification has been developed with a maximum - 10,000. The pressure created in the system is the same for all models of this class - 5000 Pa. The speed of the processed product entering the device and its further movement in it must be maintained within 15-18 m/s.
According to the direction of movement of the working medium, CIOT cyclones are manufactured in left-handed or right-handed versions. The entire line of CIOT units is made of carbon steel. At the request of the client, a cyclone made of other materials can be selected. The inlet/outlet pipes of the universal device are quickly connected to the duct system using adapters of any size and flanges. The hopper located under the device serves as a storage for captured contaminants. To ensure proper fire safety, the hopper must be cleaned either continuously or periodically, but in a clear mode. If the standard for the height of the accumulated layer of contaminants is exceeded, there is a possibility of device failure.
To ensure the flow of the treated medium into the cleaning system, it is necessary to install an appropriate fan. It can be placed both in front of the cyclone - for the discharge operation, and behind it - for the suction operation. In case of abrasive contaminants, the CIOT cyclone is installed exclusively on the suction duct, in this case the lower part of the CIOT cyclone must be armored with special corundum cement. When installing a cyclone of the CIOT class on the suction side, the air is discharged through a spinner equipped with a screw cover. It is used when the air treated by the cyclone is supplied to a specific area or when the CIOT cyclone is placed in front of the fan. Cyclones of the CIOT class are firmly installed on the foundation in a closed room or outside the building. This equipment is designed to work with a hot flow of contaminated air, therefore, safe insulation of all surfaces of the cleaning system must be performed. The cleaning system must be completely airtight, the presence of suction is excluded.
In order to obtain maximum efficiency of the entire system as a whole, it is necessary to correctly select and take into account:
CIOT class cyclones deserve due attention from consumers. It is quite difficult to buy a CIOT class cyclone on your own. To correctly resolve this issue, you must definitely contact a specialized cyclone sales center - the Ventilator online store. We follow the rule - everything is better for the buyer. The center's staff treats customers with special attention. We work directly with the manufacturer, and therefore the prices for CIOT class cyclones are modest. Call us, hurry up and get acquainted with the catalog for the offered product. The center's consultants will select the appropriate model of CIOT cyclone for cleaning the clogged product, as well as a decent fan to go with it, based on technological requirements.
